Isnin, 9 April 2007

Tail Light Clear Coat Polish

So today as a learning project to fixing the crack lines on my spoiler clear coat in the future, I decided to fix up my Tail Light Clear Coat that took the abuse of a Canadian Winter and salt and looked dull and had the same crack lines.

Before picture of the tail light:

Tail Light Before

You see the lines and how dull it is. Hence why I took them off the car and put my all reds back.

My weapons of choice:
3m Swirl Remover (get it here!) and 600 grit Sandpaper:
3m Swirl Mark Remover
Mothers Powerball (get it here!):
Mothers Powerball

So wet sand the clear coat down to remove imperfections and for me I used 600 grit as anything higher would not remove the lines / cracks that were in my clear coat:
Tail Light Clear Coat Wet Sanded

Remember! if you sand to far you may remove all the clear coat. Keep checking to make sure you don't completely remove the clear coat.

Once it is sanded and you see the cracks / lines gone and it looks smooth, its time to use the swirl mark remover:

Here it is on the sanded part of the tail light:
Tail Light with Swirl Remover
I used too much here I think, but oh well :)

Then use the Mothers Powerball to shine those tails up real nice.

Here's two pics of how clear they are:

Tail Light Polished 1
Tail Light Polished 2

Here's three pics showing the difference in Before and After:
Tail Light Polished Compare 1
Tail Light Polished Compare 2
Tail Light Polished Compare 3

If your looking to start up a car related web site, get your domain name registration and web hosting from Domains at Retail.

Tiada ulasan:

Catat Ulasan